logo malvin gricignano
Scarica i Cataloghi Malvin
Scarica i Cataloghi Malvin
Scarica i Cataloghi Malvin
Adhesives and Consolidators

Adhesives and Consolidators

INTOAGGRAPPO

Intoaggrappo
Cementing clout with high penetrating and insulating resin based on resinous latex in aqueous dispersion for external and internal, particularly suitable for the consolidation of insubstantial surfaces, To improve the adhesion of background plasters or mineral coatings or other mortars on new or old walls, on smooth or poorly absorbent surfaces, not uniform in absorption, concretes, weak, inconsistent or flour supports, on supports Base Chalk and Anhydrorene, on autoclavable cellular concrete blocks.
Suitable for the consolidation of cementitious screets of low consistency.

Packaging: Tanica 5-20 LT
Color: Colourless
Usage: Indoor/outdoor
Dilution: 1:2 with clean water on concrete supports and on supports generally non-absorbent and/or particularly smooth and/or difficult to adhere • 1:4/1:5 with clean water on supports generally absorbent or on average Absorbent
Yield: 8/12 sqm for LT, depending on the absorption of the support

ANCOMUR

Ancomur
Adhesive aggregate, solvent-free, for external and internal, specific to promote an optimum adhesion of lime and cement base plasters, coloured mineral plasters and shavings Cement on smooth or poorly absorbent supports. As insulation of cementitious supports in the case of application of plaster base lime and plaster. Thanks to its particular formulation, and in particular thanks to the the addition of silica aggregates is able to form a surface perfectly adherent to the supports and particularly rough so as to guarantee an optimum remedy for all adhesion problems on reinforced concrete supports, smooth and generally on little supports Absorbent.

Packaging: 20 Kg Barrel
Color: Yellow
Usage: Indoor/outdoor
Particle size: ≤ 0.5 mm
Dilution: 2 parts of product and 1 part of water
Yield: 0,250-0,300 Kg/MQ, depending on the absorption of the support

INTODUR

Intodur
Cementing cement with high penetrating power based on resinous latex in aqueous dispersion, solvent-free and low VOC content, for external and internal, particularly suitable for the consolidation of highly absorbent surfaces, Inconsistent or flickers. Specific to optimize the continuity of the mechanical resistances of cementitious screeds, cementitious or mineral bottoms in general, to be applied before the laying of ceramics, porcelain stoneware, parquet, natural stone, carpets and resilient. Before applying shavings
or mineral coatings. Suitable for screed with underfloor heating.

Packaging: 20 LT Tank • 1000 LT tanks
Color: Colourless
Usage: Indoor/outdoor
Dilution: Ready to use
Yield: 4/7 sqm for LT, depending on the absorption of the support

INTOGUM

Intogum
Concentrated latex to be mixed with cementitious mortars to optimize workability, adhesion, flexibility and resistance. To be mixed with cement or cement and sand for the creation of jet shooting Boiacas, low and high thickness mortars, fluid mortars for filling cracks, to be mixed with "Intomasso" to make screed 0.5-3 cm thick and to generally confer Greater plasticity and resistance to cementitious mortars and plaster in general, to improve adhesion characteristics, flexibility and water resistance of adhesives. To be used also as cement clinging with high penetrating power and insulating for external and internal, particularly suitable for the consolidation of inconsistent surfaces or flour; To improve the adhesion of background plasters or mineral coatings on smooth or poorly absorbent surfaces, concretes, weak, inconsistent or floured supports. Suitable for the consolidation of cementitious screets of low consistency.

Packaging: 5-10-20 LT tank
Color: White
Usage: Indoor/outdoor
Dilution:
As Holding/consolidant:
1:2 with clean water on concrete supports and on supports in general non-absorbent and/or particularly smooth and/or difficult to adhere • 1:4/1:5 with clean water on supports generally absorbent or medium-absorbent
As additive:
In relation to the Inmpiego
Made: 
As Holding/consolidant:
8/12 sqm for LT, depending on the absorption of the support
As additive:
In relation to the use
Solid residue UNI EN ISO 3251:36%
Share by: