Fillers and Finishers

Pre-mixed premixed fibre-reinforced anti-carbonate shrinking agent in compliance with EN 1504-2 and EN 998-1 based on special hydraulic binders, gray or natural white for external and internal smoothing of concrete surfaces, rustic and plastic coatings and / or minerals, of traditional or premixed plasters based on lime, lime and cement both new and old, even if painted, provided they are in excellent condition, of plasters with shrinkage lesions, with hand application, with smooth or sponge finish with maximum thickness of application up to 2.5 cm.

PACKAGING: 25 kg sacks - 70 bags sacks - 17.50 ql

USE: Indoor / Outdoor

COLOUR: Grey / White

AVAILABILITY: INTORAS G / B: max thickness of application 5 mm • INTORAS MAX G / B: max thickness of application 2.5 cm

GRANULOMETRY: Type G / B: ≤ 0.6 mm • Type MAX G / B: ≤ 1.3 mm

YIELD: 1.5 / 1.6 kg / sqm per mm of thickness

EN 1015-19 STEAM PASSAGE RESISTANCE COEFFICIENT: μ ≤ 22

CAPILLARY WATER ABSORPTION EN 1015-18: Class "W1"

THERMAL CONDUCTIVITY EN 1745: λ 10, dry, mat = 0.41 W / mK

EN 1542 ADERENCE TIE: > 1 MPa

ASSORB. CAPILLARY AND PERMEABILITY TO WATER (w) EN 1062-3: <0,1 Kg / (m² • h½)

PERMEABILITY TO WATER VAPOR (sd) EN ISO 7783-2: Class I

PERMEABILITY TO CO2 (sd, CO2) EN 1062-6: > 50 m

COMPRESSION RESISTANCE At 28 days EN 1015-11: > 18 MPa (CSIV Class)

Pre-mixed water-repellent, anti-carbonate, fibre-reinforced, shrinkage-resistant, shrinkage layer incompliance with EN 1504-2 and EN 998-1, based on special hydraulic binders, gray or natural white for external and internal shaving of concrete surfaces, rustic and plastic coatings and / or minerals, of traditional or premixed plasters based on lime and cement, both new and old, even if painted, in excellent condition, of plasters with shrinkage lesions, applied by hand, with a smooth or sponged finish with a maximum thickness of up to 2.5 cm.

PACKAGING: 25 kg sacks - 70 bags sacks - 17.50 ql

USE: Indoor / Outdoor

COLOUR: Grey / White

AVAILABILITY: INTORAS G / B: max thickness of application 5 mm • INTORAS MAX G / B: max thickness of application 2.5 cm

GRANULOMETRY: Type G / B: ≤ 0.6 mm • Type MAX G / B: ≤ 1.3 mm

YIELD: 1.5 / 1.6 kg / sqm per mm of thickness

EN 1015-19 STEAM PASSAGE RESISTANCE COEFFICIENT: μ ≤ 22

CAPILLARY WATER ABSORPTION EN 1015-18: "W2" class

THERMAL CONDUCTIVITY EN 1745: λ 10, dry, mat = 0.41 W / mK

EN 1542 ADERENCE TIE: > 1 MPa

ASSORB. CAPILLARY AND PERMEABILITY TO WATER (w) EN 1062-3: <0,1 Kg / (m² • h½)

PERMEABILITY TO WATER VAPOR (SD) EN ISO 7783-2: Class I

PERMEABILITY TO CO2 (SD, CO2) EN 1062-6: > 50 m

COMPRESSION RESISTANCE At 28 days EN 1015-11: > 18 MPa (CSIV Class)

Premixed, high elasticity, anti-carbonate, thixotropic, water-repellent, fibro-reinforced, shrinkage compensated to EN 1504-2 and EN 998-1 based on special hydraulic binders, suitable for universal use on any compatible substrate. For the external and internal smoothing of concrete surfaces, of rustic, plastic and / or mineral coatings, of traditional or premixed plasters based on lime and cement, both new and old, even if painted, provided they are in excellent condition, of plasters that present shrinkage lesions, concrete block walls, autoclaved cellular concrete, coatings in polystyrene panels, polystyrene (also embossed), polyurethane, cork, cement wood. To uniform plastered surfaces with different mortars. As a bonding base for coatings in polystyrene panels, polystyrene (also embossed), polyurethane, cork, cement wood. Used as a shave on coatings, it can be used as a decoration for MEHLVIT ELS / PLUS or AGROPOLI ELS / PLUS elastomeric water-based paint. Specific for finishing the thermal insulating plaster system (INTOTHERM). With sponged finish.

PACKAGING: 25 kg sacks - 70 bags sacks - 17.50 ql

USE: Indoor / Outdoor

COLOUR: Grey / White

GRANULOMETRY: ≤ 0.6 mm

GRANULOMETRY MAX TYPE: ≤ 1.2 mm

YIELD: AS ADHESIVE • 2/3 kg / sqm bonding; Full-surface bonding 4/5 kg / sqm HOW TO RASANTE • 3/4 kg / mq

EN 1015-19 STEAM PASSAGE RESISTANCE COEFFICIENT: μ ≤ 10

CAPILLARY WATER ABSORPTION EN 1015-18: Class "W1"

THERMAL CONDUCTIVITY EN 1745: λ 10, dry, mat = 0.35 W / mK

EN 1542 ADERENCE TIE: > 1 MPa

ASSORB. CAPILLARY AND PERMEABILITY TO WATER (w) EN 1062-3: <0,1 Kg / (m² • h½)

PERMEABILITY TO WATER VAPOR (SD) EN ISO 7783-2: Class I

PERMEABILITY TO CO2 (SD, CO2) EN 1062-6: > 50 m

COMPRESSION RESISTANCE TO 28 days EN 1015-11: > 18MPa (CSIV class)

CERTIFICATION: Tested according to ETAG 004

Water-repellent finish with good elasticity based on natural lime and hydraulic binders, gray or natural white, for a smooth finish to the civil or fine, medium or coarse sponge of internal and external surfaces of old and new buildings to be applied by hand. Fibre-reinforced "FR" type available. Specific for finishing the thermal insulating plaster system (INTOTHERM).

PACKAGING: 25 kg sacks - 70 bags sacks - 17.50 ql

USE: Indoor / Outdoor

COLOUR: White / Grey

GRANULOMETRY: type F: ≤ 0.6 mm • M / SF type: ≤ 1.3

YIELD: type F: 1,5 / 2,5 kg / sq m • type M: 2 / 3,2 kg / sq m • SF type: 2,5 / 3,2 kg / sq m for 2 coats

COEF. RESISTANCE TO STEAM STEAM EN 1015-19: type F: μ ≤ 8 • Type M-SF: μ ≤ 7

CAPILLARY WATER ABSORPTION EN 1015-18: Class "W1"

THERMAL CONDUCTIVITY EN 1745 λ 10, dry, mat: Type F = 0.35 W / mK • Type M = 0.39 W / mK • Type SF = 0.43 W / mK

FLEXIBILITY: Good

Pre-mixed anti-salt premixed water-repellent finish with good elasticity, based on hydraulic binders, suitable for finishing internal and external surfaces of old and new buildings with a high level of constant quality, produced with a computerised system, to be applied by hand. Fibre-reinforced "FR" type available. Specific for the finishing of internal and external surfaces made in environments with a high saline exposure, such as marine locations. For the finishing of internal and external surfaces of old and new buildings, obtaining a civil or sponged surface. A careful and selective selection of raw materials conducted to a perfect granulometric curve, thanks to the use of its own crushing plants, produce with the addition of water an exceptionally plastic and easily workable mortar. Used as a finish, it can be applied to any interior or exterior surface to be finished. Non-cracking, non-detaching is breathable and impact resistant. It is the ideal substrate for surface coating such as paints, scratched, finishing plasters, etc.

PACKAGING: 25 kg sacks - 70 bags sacks - 17.50 ql

USE: Indoor / Outdoor

COLOUR: White / White

GRANULOMETRY TYPE FG / FB: ≤ 0.6 mm

GRANULOMETRY TYPE MB / MG / SFB / SFG: ≤ 1.3 mm

THEORETICAL RESTORATION in Kg / mq for 2 hands: TYPE FB - FG: 1,5-2,5 • TYPE MB - MG: 2-3,2 • TYPE SFB - SFG: 2,5-3,2

EN 1015-19 STEAM PASSAGE RESISTANCE COEFFICIENT: μ <7/8

CAPILLARY WATER ABSORPTION EN 1015-18: Class "W1"

THERMAL CONDUCTIVITY EN 1745: λ 10, dry, mat = 0.35 W / mK (TYPE FB / FG) • λ 10, dry, mat = 0.39 W / mK (TYPE MB / MG) • λ 10, dry, mat = 0.43 W / mK (SFB / SFG TYPE)

REACTION TO FIRE EN 998-1: Class A1

COMPRESSION RESISTANCE TO 28 days EN 1015-11: TYPE FB / FG: 2N / mm2 (CS1) • TYPE MB / MG / SFB / SFG: 2.5N / mm2 (CS1)

Anti-acid premixed antacid water-repellent finish with good elasticity, based on hydraulic binders suitable for finishing internal and external surfaces of old and new buildings with a high level of constant quality, produced with a computerized system, to be applied by hand. Fiber-reinforced "FR" type available. Specific for the finishing of internal and external surfaces made in environments with high saline exposure, such as marine locations and acid environments, such as dairy farms, canning houses, animal husbandry, thanks to the addition of special components that form a strong acid micro structure. 

PACKAGING: 25 kg sacks - 70 bags sacks - 17.50 ql

USE: Indoor / Outdoor

COLOR: Gray / White

GRANULOMETRY TYPE FG / FB: ≤ 0.6 mm

GRANULOMETRY TYPE MB / MG / SFB / SFG: ≤ 1.3 mm

THEORETICAL RESTORATION in Kg / mq for 2 hands:

TYPE FB - FG: 1,5-2,5 • TYPE MB - MG: 2-3,2 • TYPE SFB - SFG: 2,5-3,2

RESISTANCE COEFFICIENT TO STEAM PASSAGE EN 1015-19: μ <7/8

CAPILLARY WATER ABSORPTION EN 1015-18: Class "W1"

THERMAL CONDUCTIVITY EN 1745: λ 10, dry, mat = 0.35 W / mK (TYPE FB / FG) •

λ 10, dry, mat = 0.39 W / mK (TYPE MB / MG) • λ 10, dry, mat = 0.43 W / mK (SFB / SFG TYPE)

REACTION TO FIRE EN 998-1: Class A1

COMPRESSION RESISTANCE TO 28 days EN 1015-11: TYPE FB / FG: 2N / mm2 (CS1) • TYPE MB / MG / SFB / SFG: 2,5N / mm2 (CS1)

Pre-mixed premixed thixotropic anticarbonising skim with compensated shrinkage based on special hydraulic binders, suitable for universal use on any compatible substrate, to be applied by hand. As an additive in combination with MALTAVELO to create high performance breathable finishing plasters. Fibre-reinforced "FR" type available.

PACKAGING: 25 kg sacks - 70 bags sacks - 17.50 ql

USE: Indoor / Outdoor

Colour: Grey

GRANULOMETRY: ≤ 0.6 mm

YIELD: 1.5 / 1.6 kg / sqm per mm of thickness

EN 1745 STEAM RESISTANCE COEFFICIENT: μ ≤ 22

CAPILLARY WATER ABSORPTION EN 1015-18: Class "W1"

THERMAL CONDUCTIVITY EN 1745: λ 10, dry, mat = 0.41W / mK

COMPRESSION RESISTANCE TO 28 days EN 1015-11: ≥ 4 N / mm² (CSII Class)

Two-component, anti-carbonate fibre-reinforced thixotropic shaving according to EN 1504-2 and EN 998-1, based on special hydraulic binders and special synthetic polymers, specific for the external and internal smoothing of concrete surfaces, old and new plasters, stones, bricks, tuff, rustic, plastic and / or mineral coatings. Specific for the laying of a glass fibre net of 225 g with anti-alkali treatment like MALVIN NET 2.25 (page 58), for the reinforced structural reinforcement of masonry elements.

PACKAGING: 25 kg sacks - 35 bags sacks - 8.75 q.l. + 6,75 lt tanks - 35 tanks canisters - 236,25 Kg

USE: Indoor / Outdoor

COLOUR: Component A (powder) Gray • Component B (liquid) White

GRANULOMETRY: ≤ 0.5 mm

YIELD: 1,7 / 1,8 kg / sqm per mm of thickness

EN 1015-19 STEAM PASSAGE RESISTANCE COEFFICIENT: μ ≤ 22

CAPILLARY WATER ABSORPTION EN 1015-18: Class "W1"

THERMAL CONDUCTIVITY EN 1745: λ 10, dry, mat = 0.79W / mK

EN 1542 ADHERENCE BOND: > 1.5 MPa

ASSORB. CAPILLARY AND PERMEABILITY TO WATER (w) EN 1062-3: <0,1 Kg / (m² • h½)

PERMEABILITY TO WATER VAPOR (sd) EN ISO 7783-2: Class I

PERMEABILITY TO CO2 (sd, CO2) EN 1062-6: <5 m

COMPRESSION RESISTANCE At 28 days EN 1015-11: > 28 MPa (CSIV class)

Ultra-fine ultra-fine skim coat based on natural lime and hydraulic binders for a herringbone finish of traditional or premixed plasters based on lime and cement, on dehumidifying plasters, on concrete walls, as a levelling compound on flat surfaces, on old plasters after elimination of old paint or wallpaper and for patches in the area, for interiors and exteriors with thicknesses ranging from 1 to 4 mm.

PACKAGING: 25 kg sacks - 60 bags sacks - 15.00 ql

USE: Indoor / Outdoor

COLOUR: White

GRANULOMETRY: ≤ 90 micron

YIELD: 1 kg / m² per mm of thickness

THICKNESS: from 1 to 4 mm

EN 1015-19 STEAM PASSAGE RESISTANCE COEFFICIENT: μ ≤ 11

CAPILLARY WATER ABSORPTION EN 1015-18: "W0" class

THERMAL CONDUCTIVITY EN 1745: λ 10, dry, mat = 0.18 W / mK

Ultra-fine super-white skim coat based on natural lime and hydraulic binders for a herringbone finish of traditional or premixed plasters based on lime and cement, on dehumidifying plasters, on concrete walls, as a levelling compound on flat surfaces, on old plasters after elimination of old paint or wallpaper and for patches in the area, for interiors and exteriors with thicknesses ranging from 0.1 to 2 mm.

PACKAGING: 25 kg sacks - 60 bags sacks - 15.00 ql

USE: Indoor / Outdoor

COLOUR: White

GRANULOMETRY: ≤ 60 micron

YIELD: 1 kg / m² per mm of thickness

THICKNESS: from 0.1 to 2 mm

EN 1015-19 STEAM PASSAGE RESISTANCE COEFFICIENT: μ ≤ 10

CAPILLARY WATER ABSORPTION EN 1015-18: "W0" class

THERMAL CONDUCTIVITY EN 1745: λ 10, dry, mat = 0.18 W / mK

PACKAGING: 25 kg sacks - 70 bags sacks - 17.50 ql

USE: Indoor / Outdoor

COLOUR: White / Grey

GRANULOMETRY: type F: ≤ 0.6 mm • M / SF type: ≤ 1.3 mm

YIELD: type F: 1,5 / 2,5 kg / sq m • type M: 2 / 3,2 kg / sq m • SF type: 2,5 / 3,2 kg / sq m for 2 coats

EN 1015-19 STEAM PASSAGE RESISTANCE COEFFICIENT: F: μ ≤ 8 • M / SF: μ ≤ 7

CAPILLARY WATER ABSORPTION EN 1015-18: "W0" class

THERMAL CONDUCTIVITY EN 1745 λ 10, dry, mat: F = 0.35 W / mK • M = 0.39 W / mK • SF = 0.43 W / mK

PACKAGING: 25 kg sacks - 70 bags sacks - 17.50 ql

USE: Indoor / Outdoor

COLOUR: White / Grey

GRANULOMETRY: type F: ≤ 0.6 mm • M / SF type: ≤ 1.3 mm

YIELD: type F: 1,5 / 2,5 kg / sq m • type M: 2 / 3,2 kg / sq m • SF type: 2,5 / 3,2 kg / sq m for 2 coats

EN 1015-19 STEAM PASSAGE RESISTANCE COEFFICIENT: F: μ ≤ 8 • M / SF: μ ≤ 7

CAPILLARY WATER ABSORPTION EN 1015-18: Class "W1"

THERMAL CONDUCTIVITY EN 1745 λ 10, dry, mat: F = 0.35 W / mK • M = 0.39 W / mK • SF = 0.43 W / mK

APPROVED BY YTONG LABORATORIES: Test Report PB-VK-170-01

Thick white skim coat based on natural lime and hydraulic binders for the finishing of internal and external surfaces of old and new buildings such as premixed plasters or traditional lime and cement based, reinforced concrete walls, autoclaved cellular concrete blocks, obtaining a smooth surface at civil or sponged end. Available "I" type water-repellent.

PACKAGE: 25 kg sacks - 70 bags sacks - 17.50 ql
USE: Indoor / Outdoor
COLOR: White
GRANULOMETRY: ≤ 0.6 mm
SURRENDER: 1.5 / 2 kg / sqm for 2 hands
RESISTANCE COEFFICIENT TO STEAM PASSAGE EN 1015-19: μ ≤ 8
CAPILLARY WATER ABSORPTION EN 1015-18: "W0" class • "I" type: "W1" class
THERMAL CONDUCTIVITY EN 1745: λ _{10, dry, mat} = 0.35 W / mK

White or grey finish with a base of natural lime, hydraulic binders and silica sand for the finishing of internal and external surfaces of old and new buildings, obtaining a fine sponged surface. Fibre-reinforced "FR" type available. Specific for finishing the plastering system on autoclaved cellular concrete blocks (such as Ytong and Gasbeton).

PACKAGING: 25 kg sacks - 70 bags sacks - 17.50 ql

USE: Indoor / Outdoor

COLOR: White / Grey

GRANULOMETRY: ≤ 0.6 mm

YIELD: 1,5 / 2,5 kg / sqm for 2 hands

EN 1015-19 STEAM PASSAGE RESISTANCE COEFFICIENT: μ ≤ 8

CAPILLARY WATER ABSORPTION EN 1015-18: "W0" class

THERMAL CONDUCTIVITY EN 1745: λ 10, dry, mat = 0.35 W / mK

Thick white or grey water-based finish based on natural lime, hydraulic binders and silica sand for the finishing of internal and external surfaces of old and new buildings, obtaining a fine sponged surface. Fibre-reinforced "FR" type available. Specific for finishing the plastering system on autoclaved cellular concrete blocks (such as Ytong and Gasbeton).

PACKAGING: 25 kg sacks - 70 bags sacks - 17.50 ql

USE: Indoor / Outdoor

COLOUR: White / Gray

GRANULOMETRY: ≤ 0.6 mm

YIELD: 1,5 / 2,5 kg / sqm for 2 hands

EN 1015-19 STEAM PASSAGE RESISTANCE COEFFICIENT: μ ≤ 8

CAPILLARY WATER ABSORPTION EN 1015-18: Class "W1"

THERMAL CONDUCTIVITY EN 1745: λ 10, dry, mat = 0.35 W / mK

PACKAGING: 25 kg sacks - 70 bags sacks - 17.50 ql

USE: Indoor / Outdoor

COLOUR: White

GRANULOMETRY: ≤ 0.6 mm

YIELD: 1,5 / 2,5 kg / sqm for 2 hands

EN 1015-19 STEAM PASSAGE RESISTANCE COEFFICIENT: μ ≥ 7

CAPILLARY WATER ABSORPTION EN 1015-18: Class "W0" - type "I": Class "W2"

THERMAL CONDUCTIVITY EN 1745: λ10, dry, mat = 0.35 W / mK

APPROVED BY YTONG LABORATORIES: Test Report PB-VK-170-01

PACKAGING: 25 kg sacks - 70 bags sacks - 17.50 ql

USE: Exterior

COLOUR: White

GRANULOMETRY: ≤ 1.3 mm

YIELD: 2,5 / 3,2 kg / sqm for 2 hands

EN 1015-19 STEAM PASSAGE RESISTANCE COEFFICIENT: μ ≥ 7

CAPILLARY WATER ABSORPTION EN 1015-18: "W2" class

THERMAL CONDUCTIVITY EN 1745: λ 10, dry, mat = 0.35 W / mK

APPROVED BY YTONG LABORATORIES: Test Report PB-VK-170-01

PACKAGING: 25 kg sacks - 70 bags sacks - 17.50 ql

USE: Indoor / Outdoor

COLOUR: Gray / White

GRANULOMETRY: ≤ 0.6 mm

YIELD: 1 kg / m² per mm of thickness

EN 1015-19 STEAM PASSAGE RESISTANCE COEFFICIENT: μ ≤ 15

THERMAL CONDUCTIVITY EN 1745: λ 10, dry, mat = 0.24 W / mK

CAPILLARY WATER ABSORPTION EN 1015-18: Class "W1"

PACKAGING: Rolls height 1 m Length 50 m - 25x25 mm mesh

MEDIUM THICKNESS UNI 9311/3: 3mm

BREAST EXTENDED UNI 9311/5: 3.2%

STRENGTHENING UNDER TRACTION UNI 9311/5: Warp: > 2.500 N / 5cm • Weft:> 4.000 N / 5cm

MEDIUM THICKNESS OF FABRIC OPENED UNI 9311/3: 1.00mm

Pre-mixed finishing coat of super-white and ultra-fine finish based on natural lime and hydraulic binders suitable for the finishing of internal and external surfaces with high and constant quality level, produced with computerised system, to be applied by hand. To be applied directly on internal and external surfaces to obtain smooth mirror surfaces. Suitable for the smooth finishing of traditional or premixed plasters based on lime and cement, on dehumidifying plasters, on concrete walls, as a levelling compound for flat surfaces, on old plasters after the elimination of old paint or wallpaper and for patches in the area. Specifically for the creation of stucco gown thanks to the ease of application and sanding. Specifically for the realisation of partial grouting without leaving visible any overlap. Specifically in the realisation of partial grouting on already painted surface as it does not stain the next layer of painting. Specifically to level irregularities up to 2 mm.

PACKAGING: 25 kg sacks - 60 bags sacks - 15.00 ql