Natural Lime and Bio-Pozzolan Bases
Dehumidifiers
INTOSANA PRIMER
Strong anti-salt penetrating agent for the preparation of internal and external walls such as old walls in mixed stone, solid bricks, natural stone, bricks, to be restored with dehumidifying plaster. For injection into masonry bricks, stones and cement for the barrier to capillary comebacks.
STATE:
Viscous liquid
COLOUR:
Colorless / Straw
PACKAGING:
Can 5 - 20 lt
USE:
Indoor / Outdoor
DILUTION:
1 part of product and 1 part of water
YIELD:
Depending on the porosity of the substrate, however, consumption never exceeds 0.200 l of solution per m per coat
APPLICATION:
Brush-Spray-Roller
INTOBIO SANA R
Eco-friendly, dehumidifying anti-salt bio-rendering based on natural lime and bio-pozzolana to be used for the preparation of internal and external walls to be restored with dehumidifying plaster. Recyclable as inert at the end of life. Specifically for historical restorations, thanks to the natural origin of its components that respect the nature of the original materials of the structures. Available fibre-reinforced with a special composition of specially designed polypropylene fibres: type "FR". ANAB-ICEA certificate according to UNI EN ISO 14024 type I environmental labelling
PACKAGING:
Loose in silo - 25 kg sacks - 70 bags sacks - 17.50 ql
USE:
Indoor / Outdoor
COLOUR:
White
GRANULOMETRY:
≤ 1.3 mm
YIELD:
10/12 kg / m2 as a rough coat
EN 1015-19 STEAM PASSAGE RESISTANCE COEFFICIENT:
μ ≤ 15
CAPILLARY WATER ABSORPTION EN 1015-18:
≥ 0,3 Kg / m² after 24h
THERMAL CONDUCTIVITY EN 1745:
λ10, dry, mat = 0.49 W / mK
INTOBIO SANA
Eco-friendly macroporous dehumidifying bio-plaster based on natural lime and bio-pozzolana, for the rehabilitation and recovery of old and new walls, both internal and external, subject to moisture due to capillary rising and in the presence efflorescence of salts, underground environments not subject to water infiltration, buildings of historical interest, churches and wherever a definitive and natural dehumidifying treatment treatment is required. Available fibre-reinforced with a special polypropylene fibre composition, type "FR", and water-repellent type "I". Recyclable as inert at the end of life. Specifically for historical restoration, thanks to the natural origin of its components that respect the nature of the original materials of the structures of historical interest. ANAB-ICEA certificate according to UNI EN ISO 14024 type I environmental labelling.
PACKAGING:
Loose in silo - 25 kg sacks - 70 bags sacks - 17.50 ql
USE:
Indoor / Outdoor
COLOUR:
White
GRANULOMETRY:
≤ 1.3 mm
YIELD:
12/13 kg / sqm per cm of thickness
COEF. OF RESISTANCE TO STEAM TRANSFER EN 1015-19:
μ ≤ 8
CAPILLARY WATER ABSORPTION EN 1015-18:
≥ 0,3 kg / m² after 24 h
WATER PENETRATION FOR CAPILLARITY:
≤ 5 mm
TERM CONDUCTIVITY EN 1745:
λ10, dry, mat = 0.43 W / mK
AIR INLAND:
> 40%
INTOBIO SANA L
Eco-friendly macroporous dehumidifying bio-plaster based on natural lime and bio-pozzolana, for the rehabilitation and recovery of old and new walls, both internal and external, subject to moisture due to capillary rising and in the presence efflorescence of salts, underground environments not subject to water infiltration, buildings of historical interest, churches and wherever a definitive and natural dehumidifying treatment treatment is required. Available fibre-reinforced with a special polypropylene fibre composition, type "FR", and water-repellent type "I". Recyclable as inert at the end of life. Specifically for historical restoration, thanks to the natural origin of its components that respect the nature of the original materials of the structures of historical interest. ANAB-ICEA certificate according to UNI EN ISO 14024 type I environmental labelling.
PACKAGING:
Loose in silo - 25 kg sacks - 70 bags sacks - 17.50 ql
USE:
Indoor / Outdoor
COLOUR:
White
GRANULOMETRY:
≤ 1.3 mm
YIELD:
8 kg / m² per cm of thickness
EN 1015-19 STEAM PASSAGE RESISTANCE COEFFICIENT:
μ ≤ 4
CAPILLARY WATER ABSORPTION EN 1015-18:
≥ 0,3 kg / m² after 24 h
WATER PENETRATION FOR CAPILLARITY:
≤ 5 mm
THERMAL CONDUCTIVITY EN 1745:
λ10, dry, mat = 0.15 W / mK
AIR INLAND:
> 40%
INTOBIO SANA UNICO
Eco-friendly macroporous dehumidifying bio-plaster based on natural lime and bio-pozzolana, for the rehabilitation and recovery of old and new walls, both internal and external, subject to moisture due to capillary rising and in the presence efflorescence of salts, underground environments not subject to water infiltration, buildings of historical interest, churches and wherever a definitive and natural dehumidifying treatment treatment is required. Available fibre-reinforced with a special polypropylene fibre composition, type "FR", and water-repellent type "I". Recyclable as inert at the end of life. Specifically for historical restoration, thanks to the natural origin of its components that respect the nature of the original materials of the structures of historical interest. ANAB-ICEA certificate according to UNI EN ISO 14024 type I environmental labelling.
PACKAGING:Loose in silo - 25 kg sacks - 70 bags sacks - 17.50 ql
USE:Indoor / Outdoor
COLOUR:White
GRANULOMETRY:≤ 1.3 mm
YIELD:12/13 kg / sqm per cm of thickness
COEF. OF RESISTANCE TO STEAM TRANSFER EN 1015-19:μ ≤ 8
CAPILLARY WATER ABSORPTION EN 1015-18:≥ 0,3 kg / m² after 24 h
WATER PENETRATION FOR CAPILLARITY:≤ 5 mm
TERM CONDUCTIVITY EN 1745:λ10, dry, mat = 0.43 W / mK
AIR INLAND: > 40%
INTOBIO SANA FIN
Eco-friendly, dehumidifying bio-finish based on natural lime and bio-pozzolana. For the finishing of dehumidifying plasters on internal and external surfaces of old and new buildings.. Fibre-reinforced "FR" type available. Recyclable as inert at the end of life. Specifically for the historical conservation restoration, thanks to the natural origin of its components that respect the nature of the original materials of the structures. ANAB-ICEA certificate according to UNI EN ISO 14024 type I environmental labelling.
PACKAGING:25 kg sacks - 70 bags sacks - 17.50 ql
USE:Indoor / Outdoor
COLOUR:
White
GRANULOMETRY:type B / F: ≤ 0.6 mm • M / SF type: ≤ 1.3 mm
YIELD:type B: 1.5 / 2 kg / mq • type F: 1.5 / 2.5 kg / mq • type M: 2 / 3.2 kg / mq
SF type: 2.5 / 3.2 kg / mq for 2 hands
RESIST. COEFF.ICENTE AL PASS. OF VAPOR EN 1015-19:type B / F: μ ≤ 6 • type M / SF: μ ≤ 7
CAPILLARY WATER ABSORPTION EN 1015-18:≥ 0,3 Kg / m² after 24h
THERMAL CONDONDUCIBILITY EN 1745 λ10, dry, mat:Type B / F = 0.35 W / mK • Type M = 0.39 W / mK • Type SF = 0.43 W / mK
INTOBIO SANA FIN I
Eco-friendly, dehumidifying bio-finish based on natural lime and bio-pozzolana. For the finishing of dehumidifying plasters on internal and external surfaces of old and new buildings.. Fibre-reinforced "FR" type available. Recyclable as inert at the end of life. Specifically for the historical conservation restoration, thanks to the natural origin of its components that respect the nature of the original materials of the structures. ANAB-ICEA certificate according to UNI EN ISO 14024 type I environmental labelling.
PACKAGING:
25 kg sacks - 70 bags sacks - 17.50 ql
USE:
Indoor / Outdoor
COLOUR:
White
GRANULOMETRY:
type B / F: ≤ 0.6 mm • M / SF type: ≤ 1.3 mm
YIELD:
type B: 1.5 / 2 kg / mq • type F: 1.5 / 2.5 kg / mq • type M: 2 / 3.2 kg / mq
SF type: 2.5 / 3.2 kg / mq for 2 hands
RESIST. COEFF.ICENTE AL PASS. OF VAPOR EN 1015-19: type B / F: μ ≤ 6 • type M / SF: μ ≤ 7
CAPILLARY WATER ABSORPTION EN 1015-18:
≥ 0,3 Kg / m² after 24h
THERMAL CONDONDUCIBILITY EN 1745 λ10, dry, mat:
Type B / F = 0.35 W / mK • Type M = 0.39 W / mK • Type SF = 0.43 W / mK
INTOBIO SANA RAS
Eco-friendly, dehumidifying bio-skimming mortar based on natural lime and bio-pozzolana, suitable for finishing dehumidifying plasters, on internal and external surfaces of old and new buildings with smooth effect. Recyclable as inert at the end of life. Specifically for the historical conservation restoration, thanks to the natural origin of its components that respect the nature of the original materials of the structures. ANAB-ICEA certificate according to UNI EN ISO 14024 type I environmental labelling.
PACKAGING:20 kg sacks - 70 bags sacks - 14.00 ql
USE:Indoor / Outdoor
COLOUR:White
GRANULOMETRY:≤ 90 micron
YIELD:1 kg / m² per mm of thickness
EN 1015-19 STEAM PASSAGE RESISTANCE COEFFICIENT:μ ≤ 8
CAPILLARY WATER ABSORPTION EN 1015-18:≥ 0,3 Kg / m² after 24h
THERMAL CONDUCTIVITY EN 1745:λ10, dry, mat = 0.23 W / mK
MALVIN | SNC, Strada Statale 7 Bis - 81030 Gricignano Di Aversa (CE) - Italia | VAT Reg No 02612581211 | Tel. +39 081 5029713 - Tel. +39 081 8132780 | Fax. +39 081 5029748 |
amministrazione@malvinsrl.com |
Legal
Information |
Privacy Policy and Cookie Policy
Designed by 
|
Questa azienda è presente anche su 
e 
|
Questa azienda è presente anche su
e